Sandeep Mistry
Published © CC BY

Connect Your Adafruit Feather RP2040 to The Things Network

This guide will walk you through connecting your Adafruit Feather RP2040 board to The Things Network V3 using LoRaWAN.

IntermediateFull instructions provided4,757
Connect Your Adafruit Feather RP2040 to The Things Network

Things used in this project

Hardware components

Adafruit Feather RP2040
×1
Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz - RadioFruit
×1
Simple Spring Antenna - 915MHz
×1
Short Headers Kit for Feather - 12-pin + 16-pin Female Headers
×1
The Things Industries The Things Indoor LoRaWAN WiFi Gateway - 8 Channel LoRa 900 MHz
Optional, only needed if there is no coverage for The Things Network in your area.
×1

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)
Solder Wire, Lead Free
Solder Wire, Lead Free

Story

Read more

Code

pico-lortwan

Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040 based board. 📡

Credits

Sandeep Mistry

Sandeep Mistry

7 projects • 48 followers
👨🏽‍💻👷🏽‍♂️👨🏽‍🔬 Principal Software Engineer @ Arm

Comments