Intel Galileo is the first in a line of Arduino-certified development boards based on Intel x86 architecture and is designed for the maker and education communities.” Full technical details you could find on Arduino site: http://arduino.cc/en/ArduinoCertified/IntelGalileo
The GROVE - Starter Kit of GROVE System is a modular, safe and easy to use group of items that allow you to minimise the effort required to get started with microcontroller-based experimentation and learning. Although there are many choices available for microcontroller development environments.
In this project I'll be helping in setting up the project as well as upload a modified code from here on to a Windows 10 operation system.
STEPS:1) So start with downloading the Arduino IDE for Intel Galileo and the Temperature Sensor code.
2) Open the code in the IDE, select Board as Intel Galileo and Port based on the Port visible in Device Manager, accessed via Win+R and then writing devmgmt.msc
3) Once the code is uploaded, the LCD shows an initial purple light (because of color R, color G, and colorB being set at 255 each).
4) As soon the Temperature Sensor, senses the room temperature, which it checks for every 5 seconds, the following 2 conditions take place:
I Temperature is less than 27 degrees.
II Temperature is greater than 27 degrees.
Comments