Already have an account? Sign in
Device detects motion, then takes a picture of triggering wildlife. Uses a neural net to identify the wildlife species and does something.
Smart Garden is a plant environmental monitoring system.
Play a harmonized song with two stepper motors connected to a PHPoC blue or black and stepper motor smart expansion boards (PES-2403).
A laser module that makes light patterns.
Makerball is a DIY pinball machine kit that can be upgraded digitally with the Arduino Genuino 101. Here we show you the electronical part.
The cloud switches are well known, but what happens when the local internet fails and the switch cannot connect to the internet?
Open source, easy to build IoT dosimeter with sensors and Internet connectivity to centralize data.
It's IoT build night at Hexlab Makerspace! Tonight we are building a simple room monitoring device.
Use an old iPhone device to control and display the status of your Patriot IoT devices.
This small tool checks brightness, and if there is fog or night out, will turn on without human action or worry.
Ever wondered what to wear due to unpredictable weather??? Wonder no longer!
Ray LIng and Eduardo Garcia
This is simply a project that I did in my electronics class. It's simple and easy to do.
This is a rebuild of another project built on ATtiny85. The device wakes-up by external interrupt of a PIR sensor.
Garage doors hard to see? Need to know if they are open or closed? This project may be of use to you.
This project creates a relay and a water pump for monitoring moisture.
Create a simple home automation system using Arduino and an Android phone.
This project is to develop an RFID based access control gate for an office. Visitors having a valid access card will be granted access only.
Muhammad Zeeshan Akram
A tool to control the climate in any room.
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Zubayer Al Billal Khan
This project describes how to build an Arduino-based, text-controlled gum dispenser
Mo Piper Cordova
This project uses a DHT11 humidity and temperature sensor for detection, then displays it on a 16 X 2 LCD display.