Arduino project to show how to run three different types of motors: stepper motor, continuous rotation servo and 180 degree position servo.
A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.
Use a RaspberryPi master to communicate with 2 EtherCAT Arduino Shield by Esmacat(EASE) on Arduino to control motors using LCD shield input.
Our dynamometer tests the performance of stepper motors and their drivers by applying customizable load torque profiles through a GUI.
Tired of getting off your couch to unlock your door for your roommate? Forget to lock your door on your way to class? Say no more…
Use an EtherCAT master to communicate with an EtherCAT Arduino Shield by Esmacat(EASE) on an Arduino to control motors using a motor shield.
I wanted to create a way to pass salt in the laziest way imaginable using the Infineon TLE493D 3D Magnetic Sensor 2GO.
A novel use of a stepper motors in creating music.
Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?
We have created a car controlled by claps with Arduino. It also stops when it impacts with something.
BeagleBone Blue's DC motor drivers can be used to drive bipolar stepper motors too! Pair them up with a little code for open loop control.
This project will show you how you can control a stepper motor's speed and direction using the classic 555 timers.
This note (3rd in series) illustrates the introductory use of a stepper motor from an Arduino single board microcomputer.
On the web are Cloned Keyes CNC Shields for the Arduino NANO. They are cheep and good value. BUT. The Micro Stepping Jumpers are wrong.
A simple project to make a speed controller for a stepper motor, useful for testing motors.
A multiplayer electronic board game table allowing up to 4 players. It features a low-res pixel display and a rotating die.
A dust shoe for CNC routers that clips on and adjusts with a magnet, then locked down with a spring clamp.
Start-me-up example for Arduino Uno and STM L6470 dual-motor eval board X-NUCLEO-IHM02A1.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
Stepper motor controlled and 3D printed positioner to allow image scanning using pulsed terahertz waves for detection of breast cancer.
When sensor detects movement the stepper motor activates. Can be reversed by removing the ! in if cycle.
Make your own H-Bridge motor driver with just a few components at home
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
Control a stepper motor remotely using xChip OC06 (PCA9554A I/O Expander & DRV8825 Stepper Motor Controller) and CW02 (ESP32) using Ubidots.