The making of a large 3D printer (400x400x400 mm) for a college project.
A barn door astrophotography mount made with no special tools.
ISSOT keeps track of the International Space Station and gives you a visual indication of its location; even if you can’t see it.
Use LEGO bricks and Hackeet Low-Code platform to build a voice-activated weather station that respects your privacy.
Windows IoT Core on RPi 3 running two stepper motors using DRV8825 stepper motor drivers. There are two examples to use DRV8825.
A full featured stepper control involving speed and line interpolation for 2-axis motion.
A nice and fun watering system to nicely take care of your plants built from Raspberry Pi, LEGO bricks and Hackeet Low-Code platform
A rotating platform based on a stepper motor 28BYJ48, controlled via the X113647 stepper motor driver by serial dialogue.
Play around with Lego, Arduino, stepper motors, IR, and piezo beepers! Blip, blop!
This is a homemade automatic cat feeder instruction. Simple to use and easy to build, no special tools or materials are needed.
Use an EtherCAT master to communicate with an EtherCAT Arduino Shield by Esmacat(EASE) on an Arduino to control motors using a motor shield.
Use a RaspberryPi master to communicate with 2 EtherCAT Arduino Shield by Esmacat(EASE) on Arduino to control motors using LCD shield input.
Tired of getting off your couch to unlock your door for your roommate? Forget to lock your door on your way to class? Say no more…
Our dynamometer tests the performance of stepper motors and their drivers by applying customizable load torque profiles through a GUI.
Robotics, Arduino, EasyDriver, Stepper Motor, Servo Motor, Etc...
A novel use of a stepper motors in creating music.
BeagleBone Blue's DC motor drivers can be used to drive bipolar stepper motors too! Pair them up with a little code for open loop control.
We have created a car controlled by claps with Arduino. It also stops when it impacts with something.
Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...
On the web are Cloned Keyes CNC Shields for the Arduino NANO. They are cheep and good value. BUT. The Micro Stepping Jumpers are wrong.
A dust shoe for CNC routers that clips on and adjusts with a magnet, then locked down with a spring clamp.
When sensor detects movement the stepper motor activates. Can be reversed by removing the ! in if cycle.
Make your own H-Bridge motor driver with just a few components at home