IKEA PS 2014 Pendant Lamp Modification
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
In this project we will learn how to use step motor with code.
Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Here I want to tell you how to make incremental encoder from stepper motor.
This project will show you how you can control a stepper motor's speed and direction using the classic 555 timers.
Use three stepper motors to make the classic analog clock movement in the opposite direction.
A simple project to make a speed controller for a stepper motor, useful for testing motors.
Start-me-up example for Arduino Uno and STM L6470 dual-motor eval board X-NUCLEO-IHM02A1.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
I will show you how to control the movemovent of a stepper motor using the Azure Sphere MT3620 device
Arduino project to show how to run three different types of motors: stepper motor, continuous rotation servo and 180 degree position servo.
I wanted to create a way to pass salt in the laziest way imaginable using the Infineon TLE493D 3D Magnetic Sensor 2GO.
This note (3rd in series) illustrates the introductory use of a stepper motor from an Arduino single board microcomputer.
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
Control a stepper motor remotely using xChip OC06 (PCA9554A I/O Expander & DRV8825 Stepper Motor Controller) and CW02 (ESP32) using Ubidots.
Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?
Control a stepper motor remotely using XinaBox xChips CW01 (ESP8266) and OC06 (PCA9554A & DRV8825) using to Ubidots over HTTP.