This is a homemade automatic cat feeder instruction. Simple to use and easy to build, no special tools or materials are needed.
The making of a large 3D printer (400x400x400 mm) for a college project.
Use a RaspberryPi master to communicate with 2 EtherCAT Arduino Shield by Esmacat(EASE) on Arduino to control motors using LCD shield input.
Use an EtherCAT master to communicate with an EtherCAT Arduino Shield by Esmacat(EASE) on an Arduino to control motors using a motor shield.
Make your own H-Bridge motor driver with just a few components at home
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
A nice and fun watering system to nicely take care of your plants built from Raspberry Pi, LEGO bricks and Hackeet Low-Code platform
Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?
Here I want to tell you how to make incremental encoder from stepper motor.
A multiplayer electronic board game table allowing up to 4 players. It features a low-res pixel display and a rotating die.
This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
On the web are Cloned Keyes CNC Shields for the Arduino NANO. They are cheep and good value. BUT. The Micro Stepping Jumpers are wrong.
A rotating platform based on a stepper motor 28BYJ48, controlled via the X113647 stepper motor driver by serial dialogue.
When sensor detects movement the stepper motor activates. Can be reversed by removing the ! in if cycle.
A barn door astrophotography mount made with no special tools.
Start-me-up example for Arduino Uno and STM L6470 dual-motor eval board X-NUCLEO-IHM02A1.
Our dynamometer tests the performance of stepper motors and their drivers by applying customizable load torque profiles through a GUI.
Use LEGO bricks and Hackeet Low-Code platform to build a voice-activated weather station that respects your privacy.
Tired of getting off your couch to unlock your door for your roommate? Forget to lock your door on your way to class? Say no more…
A dust shoe for CNC routers that clips on and adjusts with a magnet, then locked down with a spring clamp.
Control a stepper motor remotely using xChip OC06 (PCA9554A I/O Expander & DRV8825 Stepper Motor Controller) and CW02 (ESP32) using Ubidots.
Control a stepper motor remotely using XinaBox xChips CW01 (ESP8266) and OC06 (PCA9554A & DRV8825) using to Ubidots over HTTP.
Sony Spresense Board + NodeMCU + Google Firebase + Android Studio
A simple project to make a speed controller for a stepper motor, useful for testing motors.