Bridging the gap between professional and DIY/hobbyist bench power supply.
Get not only 5 volts but also 9, 12 volts (18 Watts max) out of any QC-compatible charger/power bank for supplying power hungry projects.
After you read this post, your projects will never run out of power after a power outage.
This is an enclosure for the Omega that includes space for a regulator circuit and batteries.
A simple and inexpensive solution is to use a 'mobile power bank'
A tattoo artist friend of mine and I were discussing some of the limitations of current tattoo power supplies. I custom built her one.
A spiffy new benchtop power supply from a junked PC and an ATX breakout board.
First test of a separate Power Supply Module 3.3V and 5V.
Every engineer needs at least one bench power supply in his house. I agree one can get the power supply directly from the store. How else?
teensy++ controlling voltage regs. and power transistors.
Lots of makers find themselves running out of space quite quickly, this mini power supply helps solve this issue.
Convert smbs to lab bench power supply. SMPS or switched mode power supply is an electronics device that is used to convert AC to DC.
Hi everybody! Im sick and tired of all these small and ugly powerbanks that doesnt have capacity enough to even charge your cellphone once.
A very simple 12V battery backup circuit with a 9V regulated output for powering electronics in an event of a power cut.
I hacked to DPS3005 power supply, by connecting a TI CC2640R2F LaunchPad using UART interface to add Bluetooth connectivity!
A beginner's guide to start working on breadboard. Breadboard power stage.
An on/off switch for Raspberry Pi using a Trinket and a PowerBoost 1000 (from Adafruit).
AC Line frequency (50Hz / 60Hz) has small fluctuations in the short term, but is compensated daily resulting in a quite accurate reference.