The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
How to build a DIY Wi-Fi gas detector that sends SMS alerts using a Particle Photon, a gas sensor and a buzzer
Using the RCWL-0516 radar sensor to detect motion.
My device is just a prototype to show you how to the monoxide detector.
Evaluate the amount of the energy generated by a solar panel at a given direction through light intensity levels.
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
The PixyCam is a useful sensor that can detect various colors which can make it a great addition to Texas Instruments MSP432 MCU.
Insecure about your valuables stored inside your vault? Using this Two way security locking system keep your insecurities away.
An extremely straightforward project involving a digital PIR sensor, which can be utilised for many security and home automation uses.
If motion is detected, this will light one LED, and if not, it will light the other.
If it detects water, the circuit gives an audible alarm.
Very simple air quality meter using the GY-MCU680V1 sensor containing the BME680 chip from Bosch Sensortec.
Standing/Seating detection - For easy multiple monitors management when using Stand Desks.
Detect cars and people which is blinding by drivers. You need only putting M5Stack and you aren't doing dedicated construction.
This sensor is used to monitor gas leakage in your home or work place, and it beeps the buzzer whenever leakage is detected.
Use the LinKIt One to detect leakage of LPG / Biogas in the kitchen and sound an alarm so that necessary measures can be taken in time.
Learn how a voltage detection pen works and how to build your own.
Improving on the Window 10 IoT project for Raspberry Pi 3.
The cheapest DIY version of a WiFi node.
Calculating distance and developing a feature intended for a smart car.
This sensor is used to monitor fire at home or in a workplace, and beeps the buzzer whenever fire is detected.
This sensor is used to monitor gas leakage in your home or workplace, and beeps the buzzer whenever a leak is detected.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Visualize the changing analog values of the MQ2 Smoke Sensor on 16x2 LCD using your Surilli Basic M0.