This robot follows the color with Pixy2 Camera.
We're developing a prototype for a cheap and easy-to-use probe with a potential application in detection and monitoring of cancerous tissue.
Creating a system in order to detect wildfire using deep learning programmation on a Raspberry Pi 4 and a Wisol module by Sigfox.
This module automatically counts the number of people entering or living in a room, home, etc...
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Detect cars and people which is blinding by drivers. You need only putting M5Stack and you aren't doing dedicated construction.
Intrusion detection by the help of the PIR sensor. Whenever someone tries to come in signal will found in the form of a text message.
This project implements a deep learning model on a Jetson Nano to count and track people passing in front of a video camera.
Detects if the person has fever or not with the help of LM35 Sensor and BoltIOT Module and Alerts the home user about the guest.
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
We will first compare the RCWL-0516 with the HC-SR501 sensor, then connect them with an ESP32 and LoRa to make a wireless motion detector.
LTspice simulation of a 555 based fire detector showing how a temperature sensing NTC thermistor switches on a buzzer when heat is on!!
Insecure about your valuables stored inside your vault? Using this Two way security locking system keep your insecurities away.
Desk job concentration could be estimated simply by using Environment Sensor. A correlation between them was found by Amazon SageMaker.
Visualize the changing analog values of the MQ2 Smoke Sensor on 16x2 LCD using your Surilli GSM.
The purpose of the project is to determine whether the anomaly is due to some human error or due to the intruder trying to access it.
Visualize the changing values of CO in air using MQ7 Gas Sensor and Surilli WiFi.
2 improvements for a simulation of fire detector: a temp. rate of rise is detected and once switched on, it needs to be reset.
We use a ultrasonic sensor for detection of the object.
Visualize the changing values of CO in air using MQ7 Gas Sensor and Surilli Basic M0.
This project uses Internet of Things technology to detect and alert LPG gas leakage.
Visualize the changing analog values of the MQ2 Smoke Sensor on 16x2 LCD using your Surilli Basic M0.
The closer the distance from the sensor to the releaser, the brighter the LED.
Whenever it detects EMF, LED will Light up and buzzer will make sound until detector is in EMF range.