Leonard
Published © GPL3+

Theremino multiplexer, a multiplier of inputs and outputs.

Theremino Multiplexer is a switch with 8 I/O, that accepts analog and digital signals of any voltage from 0-5 Volts for Theremino Master.

BeginnerFull instructions provided30 minutes764
Theremino multiplexer, a multiplier of inputs and outputs.

Things used in this project

Hardware components

Theremino - Master V5
Theremino - Master V5
×1
USB-A to B Cable
USB-A to B Cable
×1

Software apps and online services

Microsoft Windows 10
Visual Studio 2015
Microsoft Visual Studio 2015

Story

Read more

Schematics

Theremino multiplexer, a multiplier of inputs and outputs.

The Theremino Multiplexer is a switch to eight locations, that accepts analog and digital signals of any voltage from 0 to 5 Volts. The signals can travel in both directions, from a Master output to eight actuators, or eight sensors to a single entrance to the Master.

Code

Theremino multiplexer, a multiplier of inputs and outputs.

AsciiDoc
No code available for this project. Ia can be used with the Theremino Master. More detailed info in the Code file.
The multiplexer can be used on any kynd ofmicrocontroller. It was developed to increase the number of input and ouptut for the Theremino Master.
Mode detaile ifo can be found here:
http://www.theremino.com/en/hardware/adapters#multiplexer

and all related schematics in EAGLE format can be downloaded from here:
http://www.theremino.com/wp-content/uploads/files/Theremino_Multiplexer.zip

Credits

Leonard

Leonard

17 projects • 25 followers

Comments