Everything ESP
Welcome to the Everything ESP community! to share projects and receive help.

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don't have an onboard 500mA 3.3V regulator or level shifting, and aren't CE or FCC emitter certified....UNTIL NOW!

The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:

  • Reset button,
  • User button that can also put the chip into bootloading mode,
  • Red LED you can blink,
  • Level shifting on the UART and reset pin,
  • 3.3V out, 500mA regulator (you'll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
  • Two diode-protected power inputs (one for a USB cable, another for a battery)

Two parallel, breadboard-friendly breakouts on either side give you access to:

  • 1 x Analog input (1.8V max)
  • 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
  • 2 x UART pins
  • 2 x 3-12V power inputs, reset, enable, LDO-disable, 3.3V output
Ok Google, Start My Car
Advanced
  • 2,615
  • 7

Work in progress

Use an Adafruit huzzah esp8266 with my car's fob and activate remote start using google assistant.

Eat In Time
  • 320
  • 5

Know when to eat food before it expires.

Eat In Time

Team Eat In Time

IoT Weather Station with Adafruit Huzzah
Intermediate
  • 843
  • 18

Build a multi-function weather station that streams data to the Internet.

Garage Door Opener
Intermediate
  • 2,998
  • 27

Full instructions

Open, close and monitor your garage door via the web and openHAB

Photon IoT Gateway
Easy
  • 2,576
  • 21

Protip

Not all IoT devices are part of the Particle Cloud. Now they can be!

Evive: a Prototyping Platform for Makers
Advanced
  • 2,343
  • 24

An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects.

Smartphone Controlled 4-Probe BBQ Thermometer
Intermediate
  • 3,239
  • 20

A BBQ thermometer with 4 separate probes. Control settings, monitor progress, and get notifications on your phone.

IoT Flaming and Talking Pumpkin using AWS and ESP8266
Intermediate
  • 4,286
  • 27

Scare those little ghouls this Halloween with fire. Simply press your Amazon Dash (or IoT) button and within 5 seconds Boom!

Embedis: I2C EEPROM Keystore
Easy
  • 181
  • 4

Protip

Store data and project settings in non-volatile, external I2C EEPROM, using simple Embedis "set" and "get" commands.

Setup Embedis: a WWW IoT Keystore
Intermediate
  • 414
  • 6

Protip

Embedis is a keystore server that allows you to separate your project configuration settings from the program itself.

Morning Meds and Smart Alarm system
Advanced
  • 1,224
  • 8

Work in progress

A smart medication and wake up alarm showcasing wearable technology, home automation and quantified self concepts working together.

WIoT: Weather Station & IoT Thing
Advanced
  • 1,024
  • 7

Work in progress

Displays weather data + monitors my garage doors + allows us to be notified when the kids get home. #Blynk, #Pebble

Vacation Automation
Advanced
  • 1,655
  • 6

Work in progress

Entry for the Microsoft and Hackster home automation contest

Uber Surge Alert with ESP8266
Easy
  • 1,589
  • 6

Full instructions

Uber Surge Alert with Huzzah ESP8266.

Uber Surge Alert with ESP8266

Team The Inventor's House

ESP8266 temp Humidity monitoring web app using Arduino IDE
Intermediate
  • 1,573
  • 5

Full instructions

the new ESP8266 WiFi works with arduino IDE, this ESP8266 comes with UART,I2C and GPIO. can be programmed directly from arduino IDE

Remote Control with the Huzzah + Adafruit.io
Intermediate
  • 1,081
  • 5

Full instructions

Use Adafruit IO to let buttons on one Adafruit Huzzah to control LEDs on another Huzzah, anywhere on Earth!

The Beacons Are Lit! Jenkins Calls for Aid
Intermediate
  • 209
  • 3

Full instructions

Jenkins build failures wired into Ardunio MQTT and controlled by a Slack bot.

ESP8266 Aurora Projector
Intermediate
  • 573
  • 4

Full instructions

Use an ESP8266 IoT to control the $15 "Aurora Master Ocean Relax Projector" via WiFi and have your own private light show.

Blynk using Embedis for Settings
Easy
  • 385
  • 4

Full instructions

Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!

Embedis: MQTT IoT Keystore
Intermediate
  • 322
  • 3

Full instructions

Display Embedis keys on your Adafruit MQTT Dashboard! An arbitrary data set example MQTT Client.

Halloween Scare
Intermediate
  • 654
  • 2

Work in progress

This is my Halloween project for 2016 that includes multiple ESP8266 and Raspberry Pi's that are linked together via MQTT.

ProjectsCommunitiesContestsLiveFree StoreBlogAdd projectSign up / Login