Smart, internet connected hot tub control system. Increase energy efficiency and convenience through better control and logic.
IOT wind generator monitoring with real time logging and display on a Wink Nimbus gauge cluster.
A Garage Door Automation system as it should be. Sensor feedback, phone notifications, Alexa skills, logged temperature and humidity.
IOT System to monitor in real time the statues of a door
An economical and easily installed security system that will alert the owner via mobile phone of anyone accessing an area through a door.
This project uses a photo resistor and LED to detect motion between the beam created by the LED to report an event to my photon board.
This project uses a Raspberry Pi and BMP 180 sensor to record temperature, altitude, atmospheric pressure, and control a fan to manage heat.
Programmed a servo motor to remotely turn the light to my room on/off. Included a photocell that tells me if it is on or off as well.
Are you like me? Do you kill all your plants because you forget to water them? This project solves that.
Have you ever wanted to remotely monitor if a room is being accessed? With a internet connection you can monitor with ease.
This project is for MEGR 3171. It consist of using a raspberry pi to monitor the temperature of my beer during fermentation.
DHT22 sensor connected to photon transmits humidity & temperature values to spreadsheets on Google Drive.
This project aims to isolate inefficiencies in my home as well as the HVAC system.
The purpose of this project is to investigate the general tuning process required to use e85 fuel for extra power.
This project will send a message to your phone or computer. Once, the temperature of the water is boiling and ready for ramen noodles.
A motion detector that sits in my food cabinet. Can be used to detect motion next to rat traps or to notify you of hungry roommates.
Having problems sinking your birdie putts? Maybe your putter grip is on crooked! This project gives you a way to perfectly align your grip.
Reads and logs information from a vehicles ECU Raspberry Pi and an ELM 327 USB to OBDII cable.
This setup will give live updates over WiFi as to the amount of beer in a keg by 12oz pours!
The IotStat is a homemade thermostat with Wifi capabilities!
Redneck project by a redneck team.
This project will cover the assembly and coding of a PIR sensor and Email notifications through Gmail with a basic subject line.
Don't stumble around looking for the light switch, turn it on before you walk inside using a bluetooth-enabled android phone!
This system continuously checks the presence of water. If water is detected it will alert the owner via email.