Shahariar
Published © GPL3+

Arduino Clone Breeding T-Rig

A plug-n-play device to give birth to bare bone clone Arduino by uploading bootloaders on different AVR chips.

BeginnerFull instructions provided1 hour6,335
Arduino Clone Breeding T-Rig

Things used in this project

Hardware components

Prolific 2303 USB-Serial Adapter
×1
16 MHz Crystal
16 MHz Crystal
×2
LED (generic)
LED (generic)
×1
IC Base 28 Pins
×1
Capacitor 100 µF
Capacitor 100 µF
×1
SparkFun Atmega328P
×2
Microchip Atmega328P
×10
Resistor 10k ohm
Resistor 10k ohm
×1
Solderless Breadboard Full Size
Solderless Breadboard Full Size
×1
Jumper wires (generic)
Jumper wires (generic)
×1
8x2 cm protoboard
×1
Arduino UNO
Arduino UNO
×1

Software apps and online services

Arduino IDE
Arduino IDE

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)
Hot glue gun (generic)
Hot glue gun (generic)

Story

Read more

Schematics

The Circuit

Reference : https://www.arduino.cc/en/uploads/Tutorial/BreadboardAVR.png

Code

ArduinoISP

Not written by me !

Credits

Shahariar

Shahariar

71 projects • 260 followers
"What Kills a 'Great life' is a 'Good Life', which is Living a Life Inside While Loop"

Comments