Step 1: Materials- Get Materials
-Blue, and red spray paint *Could choose any color
-Get something to cut the box most preferably an exacto knife or scissors although they are less safe and exacto knife cut better.
-Tape * Any color
-Sharpies, permanent markers or something to mark the box
Step 2: Cut bottom flaps of cardboard, but not top flaps
Step 3: Switch box too other side and make a circle for the head.
-Use sharpie or something to mark the box to make a circle for the head to go through.
-Use exacto knife to cut where you have the sharpie outline of the circle.
-One may want to cut the flaps inside, but use tape if the box does not stand.
Step 4: Cut arm slots
-Use sharpie or something to mark the box to make two rectangles on the right and left side of the box. A bit bigger then the upper arm so that the whole arm fitts through (make bigger if needed).
-Use exacto knife to cut the markings of the sharpie to make the arm slots.
Step 5: Draw a drawing on a piece of paper.
Choose a front and a back. Then, in the front do the following:
-Use tape to make a square to do a "screen."
-Get paper and draw a design on it.
-Draw some spider webs around the paper and the screen.
Step 6: Now to the buttom of the screen and the top.
-Draw a big circle then a small circle.
-Use some holloween ideas to do things like play/pause,menu,fastforward,ect.
-Make a power button and headphone jacket.
Step 7: iPod Created by pumpkin (apple)!
-We decided to put pumpkin in the box but is not necessary.
-Instead of Apple it is pumpkin. In the picture it says created by pumpkin, but one can just say Pumpkin.
-Add a pumpkin to go with the saying (Created By Pumpkin).
Step 8: Add some paint.
-Using the paint, paint the labels on the box.
-Then, paint as desired.
Comments